Unifirst – uniform rental and supply
UniFirst Home Page Customer Portal
HomeAbout UniFirstProductsProgram OptionsVideosInvestor RelationsContact Us

Industrial Workwear
Protective Clothing
 
 
 
 
 
 
Custom Image Programs
Corporate Casual Attire
Facility Services
Industry-Specific Programs
UniFirst Catalogs

  Request Information

Safety Standards Compliance

NFPA • NESC • OSHA • COMBUSTIBLE DUST

Armorex FR® meets ASTM standards for secondary Flame Resistance and helps you comply with NFPA standards 70E, 2112, 2113, NESC 410, and OSHA regulations applying to burn risks from hazards on the job such as electrical arcs, flash fires, and combustible dust explosions.

Armorex FR work shirts, work pants, and coveralls meet NFPA 70E Hazard Risk Categories 0, 1, and 2 as single layer garments.

NFPA 70E—The standard requires that:
  "Employees shall wear FR clothing wherever there is possible exposure to an arc flash above the threshold incident-energy level for a second degree burn..."
  More information
   
NFPA 2112—Regarding the manufacture of FR garments, NFPA 2112 states:
  "The standard shall specify the minimum performance requirements and test methods for flame resistant fabrics and components and the design and certification requirements for garments for use in areas at risk from flash fires."
  More information
   
NFPA 2113— Specifies…
  "...the minimum selection, care, use, and maintenance requirements for flame resistant garments for use in areas at risk from flash fires by industrial personnel that are compliant with NFPA 2112, Standard on Flame Resistant Garments for Protection of Industrial Personnel Against Flash Fire."
  More information
   
NESC Article 410—Effective as of January 1, 2009:
  "The employer shall ensure that an assessment is performed to determine potential
exposure to an electric arc for employees who work on or near energized parts or
equipment. If the assessment determines a potential employee exposure greater than 2
cal.cm2 exists, the employer shall require employees to wear clothing or a clothing
system that has an effective arc rating not less than the anticipated level of arc energy."
  More information
   
OSHA—The General Duty Clause, requires employers to:
  "...furnish to each of his employees employment and a place of employment which are free
from recognized hazards that are causing or are likely to cause death or serious physical
harm to his employees."
   
 
OSHA's 29 CFR1910.269 states:
"The employer shall ensure that each employee who is exposed to the hazards of flames or electric arcs does not wear clothing that, when exposed to flames or electric arcs, could increase the extent of injury that would be sustained by the employee. This apparel standard applies to all apparel worn by an employee exposed to the hazards of flames or electric arcs."

OSHA's 1910.132 ruling states:
Except as provided by paragraphs (h)(2) through (h)(6) of this section, the protective equipment, including personal protective equipment (PPE), used to comply with this part, shall be provided by the employer at no cost to employees.
More information
COMBUSTIBLE DUST—The rapid development of powdered materials and products in
modern industry has led to significantly increased explosion hazards. While the problem of
combustible dusts in the mining and grain industries has been known for some time, there
is a striking lack of awareness of the problem in many industries today. Regulators and
standards organizations such as OSHA, NFPA, ASTM and the U.S. Chemical Safety and
Hazard Investigation Board have recognized this threat and are taking actions to prevent
human and property losses from this hazard.
  More information

Additional Resources
Learn more about UniFirst's Program Options
Shop UniFirst for Standard Workwear Products
Contact UniFirst for more information